Bürkert
Direkte virkende 2/2-vejs løfteankerventil
Type 6013 / Artikelnr. 330490
Produktbeskrivelse
Ventilen 6013 er en direkte virkende løfteankerventil. For at forøge tryk- og lækagesikkerheden er stoppet og kerneføringsrøret svejset sammen. Svarende til applikationen fås forskelige kombinationer af tætningsmaterialer. En Bürkert-specifik flangeudførelse (SFB) giver mulighed for en pladsbesparende rækkeopstilling af ventiler på en tilslutningsplade til flere ventiler. Spolerne bliver presset sammen med et omgivende lag af polyamid eller af meget kemisk modstandsdygtigt epoxid. Til reduktion af strømforbruget under driften fås impulsspoler samt en "kick and drop-elektronik" til overmagnetisering (stik 2511). En optionel manuel aktivering giver mulighed for en hurtig idriftsættelse og enkel vedligeholdelse. I forbindelse med et stik efter DIN EN 17301-803 form A opfylder ventilerne kravene for beskyttelsesart IP65. Ventiler i udførelse af rustfrit stål opfylder NEMA 4X.
- Statistisk varenummer
- 84818079
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
|---|---|---|
| Type | 6013 | |
| Operation | direct-acting | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Valve function pulse version | 2-conductor version with external pole reversal | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (gas) | 6 | bar |
| Nominal pressure max (liquid) | 6 | bar |
| Main valve orifice 1 (P) (mm) | 3 | mm |
| Main valve orifice 1 (inch) | 1/8 inch | |
| Kv value (water) | 0,23 | m3/h |
| Main valve wetted material | Brass | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/8 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/8 | |
| Seat seal material category | Elastomer | |
| Seat seal material | EPDM (Ethylene-propylene-diene rubber) | |
| Sealing toward outside material | EPDM (Ethylene-propylene-diene rubber) | |
| Temperature environment min | -30 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -30 | °C |
| Temperature medium max | 120 | °C |
| Voltage / rated voltage | 6 | V |
| Voltage / rated voltage | 6 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| AC voltage | No | |
| DC voltage | Yes | |
| Battery voltage | No | |
| Rated power DC | 8 | W |
| Reduced power DC | 0 | W |
| Rated power consumption | 7 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open max. | 20 | ms |
| Switch time close max. | 30 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Valve construction | Valve complete | |
| Vægt | 0,352 | kg |
Kan kombineres med
Applikationer og værktøj
Downloads
Datablad
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
Type 6013 data sheet | direct-acting plunger valve | 2 MB | EN / EU |
|
|
Tipo 6013 scheda dati | valvola a otturatore a 2/2 vie ad azionamento diretto | 82 kB | IT / IT |
|
|
Typ 6013 Datenblatt | direktwirkendes Hubankerventil | 2 MB | DE / DE |
Brugermanualer
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
Additional manual AC10 | FM Division 1 US/CA V2.0 | 277 kB | EN / US |
|
|
Additional manual Type 541x 601x 6519 | ATEX 2101 - Devices with II 2G/D Ex i approval | 654 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type 6013 | PX011 - PX13 Use in the explosion-hazard area | 518 kB | EN,FR,DE / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 6013 | 2-way solenoid valve, direct-acting | 100 kB | EN / EU |
|
|
Operating Instructions Type 6013 | 2/2-way solenoid valve | 502 kB | EN / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | ATEX1088 - Devices with II 2G/D Ex i approval | 578 kB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 |ATEX1088 - Geräte mit II 2G/DEx i Zulassung | 571 kB | DE / DE |
|
|
Bedienungsanleitung Type 6013 | 2/2-Wege-Magnetventil | 457 kB | DE / DE |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de instrucciones Modelo 6013 | Electroválvula de 2/2 vías | 533 kB | ES / ES |
|
|
Manual de instrucciones modeloAC10 | bobina magnética | homologación ATEX y IECEx V2.0 | 1 MB | ES / ES |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Bobina magnética tipo AC10 | PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | 1 MB | PT / BR |
|
|
Manuel d'utilisation Type 6013 | Électrovanne 2/2 voies | 505 kB | FR / FR |
|
|
Manuel d'utilisation Type AC10 | ATEX1088 - Appareils avec mode de protection II 2G/D Ex i | 620 kB | FR / FR |
|
|
Manuel d'utilisation Type AC10 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
Руководство по эксплуатации |EPS 18 ATEX 1232 X, IECEx EPS18.0110X | типа AC10 | 1 MB | RU / RU |
|
|
Руководство по эксплуатации |EPS 18 ATEX 1232 X, IECEx EPS18.0110X | типа AC10 | 1 MB | RU / RU |
EU-erklæring
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 70 kB | EN,FR,DE |
Interaktiv animation
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
3D-Animation - 6013 | 2 MB | EN |
Flyers og kataloger
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
D.EV series 6011, 6012, 6013, 6014 | 2 MB | EN / EU |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |