Bürkert
Servostyret 2/2-vejs stempelventil
Type 6240 / Artikelnr. 312957
Produktbeskrivelse
Ventilen 6240 er en servostyret stempelventil. For at forøge tryk- og lækagesikkerheden er stoppet og kerneføringsrøret svejset sammen. Svarende til applikationen fås forskelige kombinationer af tætningsmaterialer. Husets formgivning og overfladekvalitet giver mulighed for maksimale flowværdier. Et omgivende lag af epoxid med høj kemisk modstandsdygtighed bliver presset sammen omkring spolerne. En optionel glideringslejring forlænger driftstiden ved tørre gasser. Til reduktion af strømforbruget under driften fås en "kick and drop-elektronik" til overmagnetisering (stik 2511). I forbindelse med et stik efter DIN EN 17301-803 form A opfylder ventilerne kravene for beskyttelsesart IP65. Ventiler i udførelse af rustfrit stål opfylder NEMA 4X.
- Statistisk varenummer
- 84818079
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
|---|---|---|
| Type | 6240 | |
| Operation | force-controlled | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | No | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | No | |
| Flow | Above seat | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (gas) | 16 | bar |
| Nominal pressure max (liquid) | 16 | bar |
| Main valve orifice 1 (P) (mm) | 6 | mm |
| Main valve orifice 1 (inch) | 1/4 inch | |
| Kv value (water) | 0,6 | m3/h |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | NPT | |
| Port connection 1 thread marking | 1/4 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | NPT | |
| Port connection 2 thread marking | 1/4 | |
| Valve seat material | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 55 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 140 | °C |
| Voltage / rated voltage | 240 | V |
| Voltage / rated voltage | 240 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 60 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 24 | V·A |
| Rated power AC | 16 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Cable plug in delivery | not included | |
| Electrical connection position | in direction of flow left | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | placed on top | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 32 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Coil special feature | for high temperatures | |
| Thermal insulation class of the actuator | H | |
| Power reduction integrated | No | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 40 | ms |
| Switch time close max. | 50 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control seal material | FKM (Fluor rubber) | |
| Low-noise version | No | |
| Core guide | Sliding ring | |
| Sliding ring material | PTFE (Polytetrafluorethylene) | |
| Main valve with integrated screen | No | |
| Installation length | 40 | mm |
| Valve construction | Valve complete | |
| Vægt | 0,295 | kg |
| Godkendelsestype | ||
| Certificeringstype |
Kan kombineres med
Applikationer og værktøj
Downloads
Datablad
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
Type 6240 data sheet | servo-assisted piston valve | 2 MB | EN / EU |
|
|
Typ 6240 Datablad | Servostyrd 2/2-vägs kolvventil | 2 MB | SV / ZDTS |
|
|
Typ 6240 Datenblatt | servogesteuertes Kolbenventil | 2 MB | DE / DE |
Brugermanualer
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
Additional manual AC10 | FM Division 1 US/CA V2.0 | 246 kB | EN / US |
|
|
Additional manual Type 6013 | PX01 - PX03 Use in the explosion-hazard area | 125 kB | EN,FR,DE / EU |
|
|
Additional manual Type XXXX |PX04 Use in the explosion-hazard area | 139 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 6240 | 2/2-way servo solenoid valve | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | ATEX approval | 1 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Operating Instructions Type AC10 | Solenoid coil | HazLoc | 2 MB | EN / EU |
|
|
Operating Instructions Type AC19 | Solenoid coil | ATEX and IECEx approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type AC19 | Solenoid coil | ATEX and IECEx approval | v2.0 | 1 MB | EN / EU |
|
|
Bedienungsaneitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC10 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC19 | Magnetspule | ATEX und IECExZulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ AC19 | Magnetspule | ATEX und IECExZulassung | v2.0 | 1 MB | DE / DE |
|
|
Driftsinstruktion Type 6240 |2/2-vägs servomagnetventil | 597 kB | SV / ZMAN |
|
|
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | Cewka elektromagnesu, Typ AC10 | 2 MB | PL / PL |
|
|
Istruzioni d'uso Tipo AC10 | Bobina magnetica, ATEX | 1 MB | IT / IT |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC10 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual d'utilisation Type AC19 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manual d'utilisation Type AC19 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 1 MB | FR / FR |
|
|
Manual de instrucciones modeloAC10 | bobina magnética | homologación ATEX y IECEx V2.0 | 1 MB | ES / ES |
|
|
Manual de operação Bobina magnética tipo AC10 | Dispositivo com homologação II 2G/D Ex | 1 MB | PT / BR |
|
|
Manual de operação Bobina magnética tipo AC10 | PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X | 1 MB | PT / BR |
|
|
Manual de usuario Tipo 6240 | Válvula de émbolo de 2/2 víasservocontrolada | 1000 kB | ES / ES |
|
|
Manuel d'utilisation Type AC10 | Bobine magnétique | HazLoc | 2 MB | FR / FR |
|
|
使用说明 6240 型 | 2 位 2通伺服电磁阀 | 2 MB | ZH / CN |
|
|
使用说明 AC19 | 型电磁线圈 | 具有 II 2G/DEx 认证的设 | v2.0 | 2 MB | ZH / CN |
|
|
取扱説明書 AC10 | 電磁コイル タイプ | 認可済み装置 ATEX IECEx V2.0 | 1 MB | JA / JP |
EU-erklæring
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 72 kB | EN,FR,DE |
Interaktiv animation
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
3D-Animation - 6240 | 3 MB | EN |
Flyers og kataloger
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
723 kB | AF | |
|
|
Solenoid valves for safety in your plant | 754 kB | EN / EU |