Bürkert
Servostyret 2/2-vejs membranventil
Type 5282 / Artikelnr. 220292
Produktbeskrivelse
Ventilen 5282 er en servostyret membranventil. Ventilens funktion forudsætter et minimumsdifferenstryk. Svarende til applikationerne fås forskellige membranmaterialer og funktioner. Standardventilhuset af messing opfylder alle europæiske drikkevandskrav. Udbuddet af ventilhuse fuldstændiggøres med modeller i rustfrit stål og gråt støbejern. 3/2-vejs-pilotventilens funktion kan nemt omstilles fra NC til NO ved at man drejer den på armaturet. Et omgivende lag af epoxy med høj kemisk modstandsdygtighed er presset sammen omkring magnetspolerne. Til idriftsættelse og prøvning er 5282 udstyret med en manuel betjening. I forbindelse med en konnektor efter DIN EN 175301-803 form A og hus i rustfrit stål opfyldes kravene i NEMA 4X.
- Statistiske varenumre
- 84818079
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
|---|---|---|
| Type | 5282 | |
| Operation | servo-controlled | |
| Actuator type | Pivot | |
| Main valve operating principle | Diaphragm valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation stop | Yes | |
| Nominal pressure min | 0,2 | bar |
| Nominal pressure max (liquid) | 10 | bar |
| Main valve orifice 1 (P) (mm) | 13 | mm |
| Main valve orifice 1 (inch) | 1/2 inch | |
| Kv value (water) | 4 | m3/h |
| QNn value (gas) | 4.300 | l/min |
| Main valve wetted material | Stainless steel | |
| Port connection 1 type | Inner thread | |
| Port connection 1 thread type | G | |
| Port connection 1 thread marking | 1/2 | |
| Port connection 2 type | Inner thread | |
| Port connection 2 thread type | G | |
| Port connection 2 thread marking | 1/2 | |
| Pilot control material medium-contacting | Stainless steel | |
| Seat seal material category | Elastomer | |
| Seat seal material | FKM (Fluor rubber) | |
| Sealing toward outside material | FKM (Fluor rubber) | |
| Temperature environment max | 55 | °C |
| Temperature medium min | 0 | °C |
| Temperature medium max | 90 | °C |
| Voltage / rated voltage | 24 | V |
| Voltage / rated voltage | 24 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| AC voltage | Yes | |
| DC voltage | No | |
| Battery voltage | No | |
| Rated power consumption | 8 | W |
| inrush power consumption AC | 30 | V·A |
| Rated power AC | 15 | V·A |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Electrical connection position | top | |
| Electrical connection polarity | Irrelevant | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 100 | ms |
| Switch time open max. | 800 | ms |
| Switch time close min | 1.000 | ms |
| Switch time close max. | 4.000 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | Yes | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oxygen version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Pilot control orifice (mm) | 2 | mm |
| Pilot control seal material | FKM (Fluor rubber) | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Installation length | 65 | mm |
| Valve construction | Valve complete | |
| Vægt | 0,910000 | kg |
Kan kombineres med
Applikationer og værktøj
Downloads
Datablad
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
Type 5282 data sheet | servo-assisted solenoid valve with servo diaphragm | 1 MB | EN / EU |
|
|
Typ 5282 Datenblatt | vorgesteuertes Magnetventil mit Servomembrane | 1 MB | DE / DE |
Brugermanualer
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
Operating Instructions Type 0780 | ATEX approval | 2 MB | EN,FR,DE / EU |
|
|
Operating Instructions Type 5282 | 2-way solenoid valve, direct-acting | 496 kB | EN / EU |
|
|
Operating Instructions Type 5282 | 2/2-way Solenoid Valve | 1 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v1.0 | 2 MB | EN / EU |
|
|
Operating Instructions Type ACP016 | Solenoid coil | ATEX and IECEx Ex approval | v2.0 | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ 5282 | 2/2-Wege-Magnetventil | 1 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v1.0 | 2 MB | DE / DE |
|
|
Bedienungsanleitung Typ ACP016 | Magnetspule | ATEX und IECEx Zulassung | v2.0 | 2 MB | DE / DE |
|
|
Manuel d'utilisation Type 5282 | Électrovanne 2/2 voies | 1 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v1.0 | 2 MB | FR / FR |
|
|
Manuel d'utilisation Type ACP016 | Bobine magnétique | Homologation ATEX et IECEx | v2.0 | 2 MB | FR / FR |
EU-erklæring
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 3 MB | EN,FR,DE |
Interaktiv animation
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
3D-Animation - 5282 | 3 MB | EN |
Flyers og kataloger
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
723 kB | AF | |
|
|
Media separation ensures continous and safe processes | 599 kB | EN / EU |
|
|
Solenoid valves for safety in your plant | 787 kB | EN / EU |