Bürkert
Direkte virkende 2/2-vejs eller 3/2-vejs ventil med vippehåndtag
Type 0131 / Artikelnr. 501501
Produktbeskrivelse
Ventilen 0131 er en direkte virkende ventil med vippehåndtag. Svarende til applikationerne fås forskelige kombinationer af tætningsmaterialer. Takket være membranadskillelsen mellem drev og væskekabinet kan også aggressive medier som syrer eller baser styres sikkert. Udbuddet afrundes med kunststofhuse af pvc eller pvdf. Et omgivende lag af epoxid med høj kemisk modstandsdygtighed bliver presset sammen omkring spolerne. Til reduktion af strømforbruget har alle DC-varianter en "kick and drop-elektronik" støbt ind i spolen. En optionel elektrisk stillingstilbagemelder detekterer skiftepositionen sikkert. I forbindelse med et stik efter DIN EN 17301-803 form A opfylder ventilerne kravene for beskyttelsesart IP65.
- Statistisk varenummer
- 84818079
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
|---|---|---|
| Type | 0131 | |
| Operation | direct-acting | |
| Actuator type | Plunger valve | |
| Main valve operating principle | Globe valve | |
| Switch function | on/off | |
| Media separation | Yes | |
| Valve function | A - normally closed - inlet port 1 (P/NC) | |
| Fluidic port connection number | 2 | |
| Valve function number of switching positions | 2 | |
| Valve function manual actuation | Yes | |
| Valve function manual actuation type | Key button | |
| Valve function manual actuation material | PA (Polyamide) | |
| Valve function manual actuation stop | Yes | |
| Valve function manual actuation screw slot | No | |
| Nominal pressure min | 0 | bar |
| Nominal pressure max (liquid) | 0,5 | bar |
| Main valve orifice 1 (P) (mm) | 20 | mm |
| Main valve orifice 1 (inch) | 3/4 inch | |
| Kv value (water) | 6 | m3/h |
| QNn value (gas) | 6.400 | l/min |
| Main valve wetted material | PVC (Polyvinyl chloride) | |
| Port connection 1 type | Body without insert and union nut | |
| Port connection 2 type | Body without insert and union nut | |
| Seat seal material category | Elastomer | |
| Seat seal material | EPDM (Ethylene-propylene-diene rubber) | |
| Sealing toward outside material | EPDM (Ethylene-propylene-diene rubber) | |
| Temperature environment min | -10 | °C |
| Temperature environment max | 50 | °C |
| Temperature medium min | -10 | °C |
| Temperature medium max | 50 | °C |
| Voltage / rated voltage | 200 | V |
| Voltage / rated voltage | 200 | V |
| Voltage tolerance negative | 10 | % |
| Voltage tolerance positive | 10 | % |
| Voltage frequency | 50/60 | Hz |
| Battery voltage | No | |
| Rated power consumption | 16 | W |
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
| Electrical connection number of contacts | 2 + Grounding conductor | |
| Electrical connection position | via outlet | |
| Protection type (IP max. with suitable connector) | IP65 | |
| Coil type | block bolted | |
| Coil insulation material (encasement) | Epoxy | |
| Coil size | 49 | mm |
| Coil wiring overvoltage protection | without | |
| Coil wiring rectifier | No | |
| Coil wiring polarity recovery diode | No | |
| Thermal insulation class of the actuator | H | |
| Nominal operation/Duty cycle | 100 | % |
| Switch time open min | 10 | ms |
| Switch time open max. | 20 | ms |
| Switch time close min | 40 | ms |
| Switch time close max. | 60 | ms |
| Valve setting opening time | No | |
| Valve setting closing time | No | |
| Back-pressure-resistant version | No | |
| Vacuum version | No | |
| Analysis version | No | |
| Oil burner valve | No | |
| Steam version | No | |
| Low-noise version | No | |
| Main valve with integrated screen | No | |
| Valve construction | Valve partially mounted | |
| Vægt | 0,947000 | kg |
Kan kombineres med
Applikationer og værktøj
Downloads
Datablad
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
Type 0131 data sheet | 2/2-way solenoid valve for railway applications | 434 kB | EN / EU |
|
|
Type 0131 data sheet | toggle valve | 884 kB | EN / EU |
|
|
Typ 0131 Datenblatt | 2/2-Wege-Magnetventil für Bahnanwendungen | 438 kB | DE / DE |
|
|
Typ 0131 Datenblatt | Kipphebel-Magnetventil | 882 kB | DE / DE |
Brugermanualer
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
Additional Manual Type 0131 0255 0256 0283 0287 0290 0293 2610 | El. operating conditions | 132 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 0131 0223 0323 | 2/2-way or 3/2-way solenoid valve | 1 MB | EN / EU |
|
|
Bedienungsanleitung Typ 0131 0223 0323 | 2/2-Wege oder 3/2-Wege-Magnetventil | 1 MB | DE / DE |
|
|
Manuel d‘utilisation Type 01310223 0323 | Électrovanne 2/2 ou 3/2 voies | 1 MB | FR / FR |
EU-erklæring
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 1 MB | EN,FR,DE |
|
|
EU-DoC|EU Declaration | 2 MB | EN,FR,DE |
Interaktiv animation
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
3D-Animation - 0131 | 3 MB | EN |
Flyers og kataloger
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
4 MB | EU | |
|
|
723 kB | AF | |
|
|
Media separation ensures continous and safe processes | 599 kB | EN / EU |