Pneumatisk betjent 2/2-vejs skråsædeventil ELEMENT
Type 2100 / Produktnr. 228584
Produktbeskrivelse
I henhold til Bürkerts filosofi angående modulære procesventiler og sensorik opfylder udformningen af skråsædeventilen af type 2100 alle praktiske krav, også under vanskelige anvendelsesbetingelser. Takket være den afprøvede, selvjusterende tagmanchet-spindelpakning opnås en meget lang holdbarhed og tæthed. Udformningen gør det enkelt at integrere automatiseringsenheder i alle udbygningstrin, fra den elektriske/optiske positionsindikator, via den pneumatiske styring, til den integrerede bus-interface og en eksplosionsbeskyttet variant af enheden. Det højtintegrerede system af ventil og automatiseringsenhed udmærker sig i kraft af et kompakt design med glat overflade, integrerede styreluftkanaler, beskyttelsesklasse IP65/67 og en høj kemisk bestandighed.
- Statistiske varenumre
- 84818073
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
---|---|---|
Type | 2100 | |
Product sub-group | On/off valves | |
Actuator version | ELEMENT | |
Main valve operating principle | Angle seat valve | |
Valve piloting type | Pneumatic | |
Nominal pressure min | 0 | bar |
Nominal pressure max | 16 | bar |
Control pressure min | 2,7 | bar |
Control pressure max | 10 | bar |
Control pressure vacuum | No | |
Temperature environment min | -10 | °C |
Temperature environment max | 60 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 185 | °C |
Kv value (water) | 27 | m3/h |
Nominal pressure (DIN EN 1333) | PN 25 | |
Nominal Pressure (DIN EN 1759) | Class 150 | |
CIP capable | Yes | |
SIP capable | Yes | |
Control function | A - normally closed (NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Valve construction | Valve complete | |
Seat seal material category | Plastics | |
Seat seal material | PTFE (Polytetrafluorethylene) | |
Orifice | 32 | mm |
Body nominal size | 32 | mm |
Body nominal size (IN) | 1 1/4 inch | |
Valve body material category | Metals | |
Valve body material | Stainless steel | |
Valve raw body manufacture | cast | |
Valve body surface treatment internal | unmachined | |
Valve body surface treatment external | untreated | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | RC (ISO 7/1) | |
Port connection 1 thread marking | 1 1/4 | |
Flow | Above seat | |
Installation length | 110 | mm |
Pipe material | Stainless steel | |
Interface to actuator | metric | |
Actuator size | 70 | mm |
Actuator material | PPS (Polyphenylene sulphide) | |
Control air connection material | Plastic | |
Control air connection type | Interface ELEMENT | |
Control air connection diameter (mm) | 6 | mm |
Control air connection 1 pre-mounted | not equipped | |
Control air connection 2 pre-mounted | not equipped | |
Control air connection position | in line direction | |
Piston seal material | FKM (Fluor rubber) | |
Control cone | No | |
Swivel plate | yes | |
Swivel plate material | Stainless steel | |
Actuator increased chemical resistance | No | |
O-ring between cover and bush | No | |
Position monitoring via magnetic piston | No | |
Position indicator | without | |
Seal nipple body material | Graphite | |
Packed seal enclosed | No | |
Vacuum version | No | |
Additional manual actuation included | No | |
Vægt | 2,100000 | kg |
Godkendelsestype | ||
Certificeringstype |