Bürkert
Pneumatisk betjent 2/2-vejs membranventil ELEMENT
Type 2103 / Artikelnr. 336079
Produktbeskrivelse
Den eksternt styrede membranventil type 2103 består af en pneumatisk betjent stempelaktuator,en membran og et 2-vejs ventilhus. Aktuatoren af høj kvalitet med hylster i rustfrit stål sikrer anvendelse under hygiejniske eller aggressive omgivelsesforhold. Ventilhuset med optimalt flow og uden dødvolumen giver mulighed for høje flowværdier og mange anvendelser. Udformningen af aktuatoren gør det nemt at integrere automatiseringsenheder i alle udbygningstrin, fra den elektriske/optiske positionsindikator, via den pneumatiske styring, til den integrerede bus-interface og en eksplosionsbeskyttet variant af enheden. Det højtintegrerede system af ventil og automatiseringsenhed udmærker sig i kraft af et kompakt design med glat overflade, integrerede styreluftkanaler, beskyttelsesklasse IP65/67/NEMA4X og en høj kemisk bestandighed.
- Statistiske varenumre
- 84818087
- Land
- DE
Tekniske egenskaber
Navn |
Værdi |
Enhed |
|---|---|---|
| Type | 2103 | |
| Product sub-group | On/off valves | |
| Main valve operating principle | Diaphragm valve | |
| Valve piloting type | Pneumatic | |
| Valve construction | Valve complete | |
| Actuator version | ELEMENT | |
| Control function | A - normally closed (NC) | |
| Valve function number of switching positions | 2 | |
| Actuator size | 70 | mm |
| Actuator material | PPS (Polyphenylene sulphide) | |
| Actuator envelope material | Stainless steel | |
| Control air connection material | Stainless steel | |
| Control air connection type | Internal thread | |
| Control air connection thread type | G | |
| Control air connection diameter (inch) | 1/8 inch | |
| O-ring between cover and bush | No | |
| Position monitoring via magnetic piston | No | |
| Valve function manual actuation | No | |
| Additional manual actuation included | No | |
| Body nominal size | 20 | mm |
| Body nominal size (IN) | 3/4 inch | |
| Diaphragm coupling | Bayonet | |
| Seat seal / diaphragm material | PTFE laminated with Gylon® with EPDM packing | |
| Fluidic port connection number | 2 | |
| Valve body material category | Metals | |
| Valve body material | Stainless steel | |
| Valve raw body manufacture | forged | |
| Manufacturer´s test certificate 3.1 included | Yes | |
| Valve body surface treatment internal | electropolished | |
| Valve body surface treatment external | Electropolished | |
| Surface finish internal | RA 0,38 µm | |
| Surface finish external | RA 0,76 µm | |
| Port connection 1 size DN | DN 20 | |
| Port connection 1 type | Weld end | |
| Port connection 1 pipe standards 1 | ISO 4200 | |
| Port connection 1 pipe standard 2 | DIN 11866 serie B | |
| Port connection 1 pipe standard 3 | DIN EN ISO 1127 | |
| Port connection 1 inner diameter (mm) | 23,7 | mm |
| Port connection 1 wall thickness (mm) | 1,6 | mm |
| Port connection 1 outer diameter (mm) | 26,9 | mm |
| Port connection 2 size DN | DN 20 | |
| Port connection 2 type | Weld end | |
| Port connection 2 pipe standards 1 | ISO 4200 | |
| Port connection 2 pipe standard 2 | DIN 11866 serie B | |
| Port connection 2 pipe standard 3 | DIN EN ISO 1127 | |
| Port connection 2 inner diameter (mm) | 23,7 | mm |
| Port connection 2 wall thickness (mm) | 1,6 | mm |
| Port connection 2 outer diameter (mm) | 26,9 | mm |
| Nominal pressure min | 0 | bar |
| Nominal pressure max | 3 | bar |
| Control pressure min | 2,5 | bar |
| Control pressure max | 10 | bar |
| Temperature environment min | -5 | °C |
| Temperature environment max | 100 | °C |
| Temperature medium min | -5 | °C |
| Temperature medium max | 130 | °C |
| Kv value (water) | 12 | m3/h |
| Nominal pressure (DIN EN 1333) | PN 16 | |
| Nominal Pressure (DIN EN 1759) | Class 150 | |
| CIP capable | Yes | |
| SIP capable | Yes | |
| Vægt | 1,457000 | kg |
Kan kombineres med
Applikationer og værktøj
Downloads
Datablad
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with cast body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm control valve with forged body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with cast body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with forged body | 2 MB | EN / EU |
|
|
Type 2103 data sheet | pneumatically operated diaphragm valve on/off with tube valve body | 2 MB | EN / EU |
|
|
Type 2XXX data sheet | accessory for pneumatic acutators CLASSIC and ELEMENT | 797 kB | EN / EU |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo de fundición] | 3 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de control de membrana [cuerpo forjado] | 3 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo de fundición] | 2 MB | ES / ES |
|
|
Tipo 2103 hoja de datos | válvula de membrana On/Off [cuerpo forjado] | 2 MB | ES / ES |
|
|
Typ 2103 Datenblatt | pneum. betätigtes Membranventil Auf/Zu mit Rohrumformgehäuse TVB(V) | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Feingussgehäuse | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membran-Regelventil mit Schmiedegehäuse | 3 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Feingussgehäuse | 2 MB | DE / DE |
|
|
Typ 2103 Datenblatt | pneumatisch betätigtes Membranventil Auf/Zu mit Schmiedegehäuse | 2 MB | DE / DE |
|
|
Typ 2XXX Datenblatt | Zubehör für pneumatische Antriebe CLASSIC und ELEMENT | 805 kB | DE / DE |
Brugermanualer
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
Additional manual Type 2031 | PE05 Removing the pressure piece from diaphragm valves | 847 kB | EN,FR,DE / EU |
|
|
Additional manual Type 2100 | PX15 Use in the potentially explosive area Category 2 | 273 kB | EN,FR,DE,ML / EU |
|
|
Additional manual Type xxxx |PX51 use in the potentially explosive area Category 2 | 273 kB | EN,FR,DE / EU |
|
|
Operating Instructions Type 2103 2104 2105 | Piston-controlled diaphragm valve | 2 MB | EN / EU |
|
|
Quickstart Type 2103 2104 2105 | Piston-controlled diaphragm valve | 2 MB | EN / EU |
|
|
Bedienungsanleitung Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 2 MB | DE / DE |
|
|
Manuel d'utilisation Type 2103 2104 2105 | Vanne à membranecommandée par piston | 2 MB | FR / FR |
|
|
Quickstart Typ 2103 2104 2105 | Kolbengesteuertes Membranventil | 2 MB | DE / DE |
|
|
Quickstart Type 2103 2104 2105 | Vanne à membrane commandéepar piston | 2 MB | FR / FR |
|
|
Szybkie wprowadzenie Typ 2103, 2104, 2105 | Sterowany tłokowo zawór membranowy | 1 MB | PL / PL |
EU-erklæring
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 2 MB | EN,FR,DE |
Interaktiv animation
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
3D-Animation - Actuator ELEMENT | 4 MB | EN |
|
|
3D-Animation - Antrieb ELEMENT | 4 MB | DE |
Flyers og kataloger
Beskrivelse |
Filstørrelse |
Sprog / Land |
|
|---|---|---|---|
|
|
On/Off and Control Valves | 1 MB | EN / EU |
|
|
Produktkatalog proces- og reguleringsventiler | 3 MB | EN / EU |
|
|
Advantages Tube Valve Body | 154 kB | EN / EU |
|
|
Diaphragm competence for hygienic applications | 1 MB | EN / EU |
|
|
Flyer Best Practice - A new formulation line for insulin vials. | 401 kB | EN / GB |
|
|
Flyer Best Practice - Diaphragm valves for an automated production line at Unither Pharmaceuticals. | 351 kB | EN / GB |
|
|
Hygienic design and precision for end products of the highest quality | 492 kB | EN / EU |